3Com HomeConnect 3CP3647 Cli User's Manual

Also see for HomeConnect 3CP3647: Installation guide

Contents

A-8 APPENDIX A: CLI C OMMAND DESCRIPTIONFltr - Number of packets received from this MAC station that were filtered out(discarded)Fwd - Number of packets received from this MAC station that were forwardedTxPkt - Number of packets forwarded to this MAC stationTxOctets - Number of bytes forwarded to this MAC stationlist connection events Displays the contents of the Connection Event Table. This table displaysinformational and error messages regarding the establishment of wide areconnections.list dns servers Displays DNS Name Servers, which you configured using the add dns servercommand. The domain name and the server address are listed for each DNSserver.list facilities Displays the system facilities (processes) currently running, plus the default loglevel. The log level is the severity of error that facility will produce syslog entriesfor. You can change the log level using the set facility loglevel command.list filters Displays all the filter names in the filter table, which you previously defined usingthe add filter command. You can remove filters using delete filter. The commandlists the filter file name, the status of the filter, and the protocols the file applies to.For example:Filter Name Status Protocolseasyfilter.fil NORMALBR BR-ETHlist files Displays the files currently stored in the FLASH file system. You can remove filesusing delete file, but you can add them using TFTP only.list interfaces Displays the installed interfaces, along with their operational status, administrationstatus, and interface index. If an interface is down, you can use enable interface totry to bring it up. The command lists:n Index - number used to identify the interfaces position in the tablen Name - interface name: eth:1 or atm:1n Oper Status - current, operating status of interface; UP or DOWNn Admin Status - administrative status you designated interface to be, up ordown. If it doesn’t match Oper Status, a problem exists with the interface.list ip addresses Displays the IP address for each interface. It lists:n Address - IP address of the interfacen Bcast Algo - broadcast algorithm usedn Reassembly Max Size - maximum allowable size of packet that can bereassembled from a fragmented packet