6 ADVANCED CONFIGURATIONThis chapter describes the advanced configuration steps required for connectingto private networks such as a remote office LAN, and also provides instructions forchanging your 56K LAN Modem’s default settings. You should have first followedthe typical configuration steps as detailed in the previous chapter beforeattempting to configure advanced parameters.The configuration windows shown in this chapter may differ slightly from what isdisplayed on your computer.AdvancedConfigurationThis section provides instructions for the following.n Setting up additional service providersn Associating service providers with computersn Editing service provider profilesn Configuring LAN parametersn Configuring modem control parametersn Changing data call parametersn Changing your passwordn Locking the configurationn Disabling password protection for the Manual Calling screenn Configuring the LAN Modem from a remote locationSetting Up AdditionalService ProvidersA service provider is a location outside of your LAN that you would like to access,such as an ISP for connecting to the Internet or a private network such as a remoteoffice LAN. You can define up to four service providers (that is, remotedestinations) on the 56K LAN Modem.This section describes the following procedures.n Setting up a connection to an ISPn Setting up a connection to a private networkn Associating computers on the LAN with selected service providersn Editing service provider profilesIf you have set up a connection to an ISP as part of the typical (that is, initial) setupprocedure, then you have already defined one service provider. Because this isconsidered a typical configuration, some default values have been assumed. Forexample, an ISP connection is associated with all of the computers connected to
