Reviewing Statistics 91Reviewing Statistics Various statistics about LAN and WAN parameters are stored and available forreview.To view statistics, do the following.1 From the 56K LAN Modem’s home page, select Statistics.2 Select the type of statistics you would like to review.You can view the following types of statistics.n Systemn Current Calln Last Calln Service ProviderRefer to the appropriate section for a list and description of the informationprovided.Understanding SystemStatisticsThe system statistics are described in Table 9.Understanding CurrentCall InformationThe current call information is described in Table 10.Table 9 Description of System StatisticsSystem Statistics DescriptionProduct ID Displays the product ID of the 56K LAN Modem.Serial Number Displays the serial number of the 56K LAN Modem.Ethernet Address Displays the Ethernet address of the 56K LAN Modem.System software version number Displays the firmware version of the 56K LAN Modem.Boot software version number For internal use only.The LAN Modem has been up for Displays the length of time the 56K LAN Modem has beenrunning. This timer is cleared when the unit is power cycledor reset.Date (Month/Day/Year) Lists the current date of the LAN Modem ** This date and time is based on the computer used to initially set up the LAN Modem.Time (Hour:Minute:Second) Lists the current time of the LAN Modem *Built-in modem Displays the DSP version of the LAN ModemTable 10 Current Call Information DescriptionCurrent Call Information DescriptionConnect Message Indicates the modem CONNECT message received for thecurrent call.Call direction Indicates whether the current call is incoming or outgoing.Service provider name Indicates the destination to which the current call isconnected.IP address in use Indicates the IP address assigned by the service provider.Primary DNS address Indicates the primary DNS address of the service provider towhich the current call is connected.