3M X56 Operator's Manual

Also see for X56: Application guide Specifications Safety guide Operator's guide

3M X56 Operator's Manual Manual pdf 10 page image

10 © 3M 2011. All Rights Reserved.3M™ Digital Projector X56Setting upConnecting with your devicesBefore connecting the projector to a device, consult the manual of the device toconfirm that the device is suitable for connecting with this projector and preparethe required accessories, such as a cable in accord with the signal of the device.Consult your dealer when the required accessory did not come with the product orthe accessory is damaged.After making sure that the projector and the devices are turned off, performthe connection, according to the following instructions. Refer to the figures insubsequent pages.Before connecting the projector to a network system, be sure to read NetworkGuide too.►Use only the appropriate accessories. Otherwise it couldcause a fire or damage the projector and devices.• Use only the accessories specified or recommended by the projector’smanufacturer. It may be regulated under some standard.• Neither disassemble nor modify the projector and the accessories.• Do not use the damaged accessory. Be careful not to damage the accessories.Route a cable so that it is neither stepped on nor pinched out.WARNING►For a cable with a core at only one end, connect the endwith the core to the projector. That may be required by EMI regulations.CAUTION• Plug-and-Play is a system composed of a computer, its operating systemand peripheral equipment (i.e. display devices). This projector is VESA DDC2B compatible. Plug-and-Play can be used by connecting this projector to acomputer that is VESA DDC (display data channel) compatible.- Take advantage of this feature by connecting a computer cable to theCOMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not workproperly if any other type of connection is attempted.- Please use the standard drivers in your computer as this projector is a Plug-and-Play monitor.• Do not turn on or off the projector while connected to a device inoperation, unless that is directed in the manual of the device. Otherwise it maycause malfunction in the device or projector.• The function of some input ports can be selected according to your usagerequirements. Check the reference page indicated beside each port in thefollowing illustration.• Be careful not to mistakenly connect a connector to a wrong port. Otherwise itmay cause malfunction in the device or projector.- When connecting a connector to a port, make sure that the shape of theconnector fits the port.- Tighten the screws to connect a connector equipped with screws to a port.- Use the cables with straight plugs, not L-shaped ones, as the input ports ofthe projector are recessed.About Plug-and-Play capabilityNOTE(continued on next page)