3M X56 Operator's Manual

Also see for X56: Application guide Specifications Safety guide Operator's guide

3M X56 Operator's Manual Manual pdf 24 page image

24 © 3M 2011. All Rights Reserved.3M™ Digital Projector X56Operating1. Press POSITION button on the remote control when no menu isindicated.The “POSITION” indication will appear on the screen.Adjusting the position2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position.When you want to reset the operation, press RESET button onthe remote control during the operation.To complete this operation, press POSITION button again. Even ifyou do not do anything, the dialog will automatically disappearafter a few seconds.● When this function is performed on a video signal or an s-video signal, some imagesuch as an extra-line may appear at outside of the picture.● When this function is performed on a video signal or s-video signal, the range ofthis adjustment depends on OVER SCAN in IMAGE menu (36) setting. It is notpossible to adjust when OVER SCAN is set to 10.● If POSITION button is pressed when a menu is indicated on screen, the displayedpicture does not move its position but the menu does.● This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE Bor HDMI port.1. Press AUTO button on the remote control.Pressing this button performs the following.Using the automatic adjustment feature For a computer signalThe vertical position, the horizontal position and the horizontalphase will be automatically adjusted.Make sure that the application window is set to its maximum sizeprior to attempting to use this feature. A dark picture may still beincorrectly adjusted. Use a bright picture when adjusting. For a video signal and s-video signalThe video format best suited for the respective input signal will be selectedautomatically. This function is available only when the AUTO is selected forthe VIDEO FORMAT item in the INPUT menu (40). The vertical position andhorizontal position will be automatically set to the default.● The automatic adjustment operation requires approx. 10 seconds. Also pleasenote that it may not function correctly with some input.● When this function is performed for a video signal, an extra line may appearoutside a picture.● When this function is performed for a computer signal, a black frame may bedisplayed on the edge of the screen, depending on the PC model.● The items adjusted by this function may vary when the FINE or DISABLE is selectedfor the AUTO ADJUST item of the SERVICE item in the OPTION menu (59).POSITION buttonPAGE UPPAGEDOWNVIDEO MY SOURCE/DOC.CAMERASTANDBY/ONFREEZEMAGNIFYASPECT SEARCHAUTO BLANKMUTEVOLUMEKEYSTONE MY BUTTONPOSITIONESCENTERMENURESETCOMPUTERAUTO button For a component video signalThe vertical position and horizontal position will be automatically set to the default.The horizontal phase will be automatically adjusted.PAGE UPPAGEDOWNVIDEO MY SOURCE/DOC.CAMERASTANDBY/ONFREEZEMAGNIFYASPECT SEARCHAUTO BLANKMUTEVOLUMEKEYSTONE MY BUTTONPOSITIONESCENTERMENURESETCOMPUTER