3M X56 Operator's Manual

Also see for X56: Application guide Specifications Safety guide Operator's guide

3M X56 Operator's Manual Manual pdf 86 page image

86 © 3M 2011. All Rights Reserved.3M™ Digital Projector X56Presentation toolsUSB DisplayThe projector can display images transferred from a computer via an USB cable (10).Select the USB DISPLAY for the USB TYPE B item in the OPTION menu. When youconnect your computer to the USB TYPE B port on the projector using a USB cable, theprojector will be recognized as a CD-ROM drive on your computer. Then, the software in theprojector, “LiveViewerLiteUSB.exe”, will run automatically and the application, “LiveViewerLite for USB”, will be ready on your computer for the USB Display. The application,“LiveViewer Lite for USB”, will be automatically closed when the USB cable is unplugged.• If the software does not start automatically (this is typically becauseCD-ROM autorun is disabled on your OS), follow the instructions below.(1) Click on the [Start] button on the toolbar and select the “Run”(2) Enter F:\LiveViewerLiteUSB.exe and then press the [OK]• CD-ROM autorun is disabled while the screen saver is running.• The image transmission from the computer is suspended while the password-protected screen saver is running. To resume the transmission, exit the screen saver.Follow the instructions that can be obtained at the site for updating.NOTEIf your CD-ROM drive is not drive F on your computer, you will need toreplace F with the correct drive letter assigned to your CD-ROM drive.This application will appear in the Windows notificationarea once it starts. You can quit the application fromyour computer by selecting “Quit” on the menu.Hardware and software requirement for computer• OS: One of the following. (32 bit version only)Windows ® XP Home Edition /Professional EditionWindows Vista ® Home Basic /Home Premium /Business /Ultimate /EnterpriseWindows ® 7 Starter /Home Basic /Home Premium /Professional / Ultimate /Enterprise• CPU: Pentium 4 (2.8 GHz or higher)• Graphic card: 16 bit, XGA or higher• Memory: 512 MB or higher• Hard disk space: 30 MB or higher• USB Port• USB cable : 1 piece• The “LiveViewer” (refer to theNetwork Guide) and this application cannotbe used at the same time. If you connect yourcomputer to the projector by using a USB cablewhile the “LiveViewer” is running, the following message will be displayed.• If any application software having the firewall function is installed into yourcomputer, make the firewall function invalid with following the operator's guide.• Some security software may block image transmission. Please change thesecurity software setting to allow the use of "LiveViewer Lite for USB".NOTE