3M X56 Operator's Manual

Also see for X56: Application guide Specifications Safety guide Operator's guide

3M X56 Operator's Manual Manual pdf 28 page image

28 © 3M 2011. All Rights Reserved.3M™ Digital Projector X561. Press BLANK button on the remote control.The BLANK screen will be displayed instead of the screen ofinput signal. Please refer to BLANK item in SCREEN menu(48).To exit from the BLANK screen and return to the input signalscreen, press BLANK button again.Temporarily blanking the screen● The projector automatically exits from the BLANK mode whensome control buttons are pressed.• The sound is not connected with the BLANK screen function. Ifnecessary, set the volume or mute first. To display the BLANK screen and mutethe sound at one time, use AV MUTE function (19).NOTE1. Press the FREEZE button on the remote control.The “FREEZE” indication will appear on the screen (however,the indication will not appear when OFF is selected for theMESSAGE item in the SCREEN menu (50)), and theprojector will go into the FREEZE mode, and the picture isfrozen.To exit the FREEZE mode and restore the screen to normal,press the FREEZE button again.Temporarily freezing the screen● The projector automatically exits from the FREEZE mode when some controlbuttons are pressed.● If the projector continues projecting a still image for a long time, the LCDpanel might possibly be burned in. Do not leave the projector in the FREEZEmode for too long.● Images might appear degraded when this function is operated, but it is not amalfunction.FREEZE buttonPAGE UPPAGEDOWNVIDEO MY SOURCE/DOC.CAMERASTANDBY/ONFREEZEMAGNIFYASPECT SEARCHAUTO BLANKMUTEVOLUMEKEYSTONE MY BUTTONPOSITIONESCENTERMENURESETCOMPUTERBLANK buttonPAGE UPPAGEDOWNVIDEO MY SOURCE/DOC.CAMERASTANDBY/ONFREEZEMAGNIFYASPECT SEARCHAUTO BLANKMUTEVOLUMEKEYSTONE MY BUTTONPOSITIONESCENTERMENURESETCOMPUTER►If you wish to have a blank screen while the projector'slamp is on, use the BLANK function above.Taking any other action may damage the projector.Important NoticeOperating