3M X56 Operator's Manual

Also see for X56: Application guide Specifications Safety guide Operator's guide

3M X56 Operator's Manual Manual pdf 22 page image

22 © 3M 2011. All Rights Reserved.3M™ Digital Projector X56OperatingAdjusting the projector’s elevator feetIf the projector is set on a slightly uneven surface to theleft or right, use the elevator feet to adjust the horizontalposition.Using the feet can also tilt the projector in order toproject at a suitable angle to the screen, elevating thefront side of the projector within 12 degrees.This projector has 2 elevator feet and 2 elevator buttons.An elevator foot is adjustable while pushing the elevatorbutton on the same side as it.To loose anelevator foot, pushthe elevator buttonon the same sideas it.To fi nelyadjust, twistthe foot.1. Holding the projector, push the elevator buttons torelease the elevator feet.2. Position the front side of the projector to the desiredheight.3. Release the elevator buttons in order to lock theelevator feet.4. After making sure that the elevator feet are locked,put the projector down gently.5. If necessary, the elevator feet can be manuallytwisted to make more precise adjustments. Hold theprojector when twisting the feet.►Do not handle the elevator buttons without holding theprojector, since the projector may drop down.►Do not tilt the projector other than elevating its front within 12 degrees usingthe adjuster feet. Exceeding the projector’s tilt restriction could shorten the lamplife and/or cause the projector to malfunction.CAUTION