3M X56 Operator's Manual
Also see for X56: Application guideSpecificationsSafety guideOperator's guide
                                                                                                        | |
Contents
| 
15© 3M 2011. All Rights Reserved.3M™ Digital Projector X56Connecting to a power supply1. Insert the connector of the power cord intothe AC IN (AC inlet) of the projector.2. Firmly plug the power cord into the outlet.Wait a few seconds and the POWERindicator will light up in steady orange.►Please use extra caution when connecting the power cord, asincorrect or faulty connections may result in fire and/or electrical shock.• Only use the power cord that came with the projector. If it is damaged, consultyour dealer to get a new one.• Only plug the power cord into an outlet whose voltage is matched to the powercord. The power outlet should be close to the projector and easily accessible.Remove the power cord for complete separation.• Never modify the power cord.WARNINGUsing the security bar and slotAC INPowercordA commercially available anti-theft chain orwire can be attached to the security bar onthe projector. Refer to the fi gure to choosean anti-theft chain or wire.Also this product has the security slot for theKensington lock.For details, see the manual of the securitytool.►Do not use the security bar and slot to prevent the projectorfrom falling down, since it is not designed for it.►Do not place anti-theft chain or wire near the exhaust vents.It may become too hot.CAUTION• The security bar and slot is not comprehensive theft preventionmeasures. It is intended to be used as supplemental theft prevention measure.NOTESecurity slotAnti-theft chain or wirePlease remember that when the DIRECT POWERON function is activated (54), connecting thepower supply will turn the projector ON.Setting upsecurity bar |
Related manuals for 3M X56
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine