Driver Installation Under Windowswww.3ware.com 336 If the “Digital Signature Not Found” message appears, click Yes tocontinue the installation.(If there are multiple controllers in the system, you will see this messageonce for each controller.)7 Continue with the normal Windows installation at this point. There are noinstructions after installing the driver that are specific to 3ware. If youneed additional instructions, refer to the Windows 2000, Windows XP, orWindows Server 2003 documentation supplied by Microsoft.8 Follow the instructions under “Making Units Managed by a 3wareController Available to Windows” on page 38.Installing the Driver on a System that Boots from aDifferent DeviceIf you are installing the 3ware RAID controller on a system that already hasthe operating system installed on another drive, follow the instructions in thissection, depending on the version of Windows installed on your system:• “To install the 3ware driver under Windows 2000” on page 33• “To install the 3ware driver under Windows XP or 2003” on page 35To install the 3ware driver under Windows 2000When you start Windows after installing a 3ware RAID controller, Windowsrecognizes it as a Plug and Play device, and brings up the Found NewHardware Wizard. This wizard guides you through installing the 3waredriver (see Figure 18). Note that you will see screens for the installation oftwo drivers during this process.
