Working with the 3DM Screenswww.3ware.com 79Viewing Information About Different ControllersIf you have more than one 3ware RAID controller in the system, you selectthe one you want to see details about from the drop-down list at the right ofthe menu bar.This drop-down is available on all pages that provide controller-specificfeatures.Figure 39. 3DM Controller Selection Drop-downRefreshing the ScreenYou can refresh the data on the screen at any time by clicking Refresh Pagein the menu bar. This causes 3DM to update the information shown withcurrent information from the controller and associated drives.Automatic refreshes can also be set. For details, see “Setting the Frequency ofPage Refreshes” on page 84.3DM Screens and What They're Used ForThe table below shows a list of the pages you work with in 3DM anddescribes what they are used for. Details about each page and the fields andfeatures on it are provided in Chapter 11, “3DM 2 Reference”. The pagenames in the table provide links to details about that page.In addition, the step-by-step instructions provided in the chapters onconfiguring and maintaining your RAID controller and units explain how todo particular tasks in 3DM.Note: Throughout these instructions, the term current controller is used to refer tothe controller which is currently selected in this drop-down list.Note: If you click Refresh on the browser window instead of on the 3DM menu bar,you will be taken back to the Summary page.
