ABB ACS355 Series Quick Start Up Manual

Also see for ACS 800 Series: User manual Hardware manual Hardware manual Hardware manual Installation guide

Contents

ABB ACS355 Series Quick Start Up Manual Manual pdf 29 page image

29Starting ACS800 drives for PROFINET1. Power up the drive.2. Enable the communication between the adapter module and the drive by setting parameter 98.02COMM. MODULE LINK to FIELDBUS.3. Set the FENA configuration parameters in group 51. At the minimum, set parameters 51.01 FBA Atype as Ethernet, 51.02 Protocol/Profile as PNIO ABB Pro (11), 51.04 IP configuration as Static, andrequired IP address from parameter 51.05 to parameter 51.08 and 51.09 Subnet CDR as 24.4. With parameter 30.18 COMM FLT FUNC, select how the drive reacts to a fieldbus communicationbreak.5. With parameter 30.19 MAIN REF DS T-OUT, define the time between communication break detectionand the selected action.6. Define the process data transferred to and from the drive in the RPBA-01 configuration parametergroup 51.Note: The Status Word, Actual Speed, Control Word and Speed Reference are configured as default.7. Validate the settings made in parameter groups 51, 54 and 55 by setting parameter 51.27 FBA PARREFRESH to REFRESH.8. Set the relevant drive control parameters to control the drive according to the application.