PE (grounding)T1/U2, T2/V2, T3/W2L1, L2, L3FramesizeTighten-ing torquelbf·ftBolt sizeTighten-ing torquelbf·ftMax. wiresizeAWGMin. wiresize 1)AWGTighten-ing torquelbf·ftBolt sizeMax. wiresizeAWG29.5M10 (3/8")22.13×300MCM322.1M10 (3/8")3×300MCMR629.5M10 (3/8")22.13×500MCM3/022.1M10 (3/8")3×500MCMR729.5M10 (3/8")22.12×(3×300MCM)2×1/0 /2×3/0 2)22.1M10 (3/8")2×(3×300MCM)R829.5M10 (3/8")51.62×(3×500MCM)2×3/051.6M12(7/16")2×(3×500MCM)R929.5M10 (3/8")51.64×(3×300MCM)-51.6M12(7/16")4×(3×300MCM)R1029.5M10 (3/8")51.64×(3×500MCM)-51.6M12(7/16")4×(3×500MCM)R111) Note: Minimum wire size does not necessarily have enough current capability for full load.Make sure the installation complies with local laws and regulations.2) -01-246A-4: 2×1/0, -01-293A-4: 2×3/0￭ US – With option +E205Input and motor cable terminal bolt sizes, maximum accepted wire sizes (per three phases)and tightening torques are given below.PE (grounding)L1, L2, L3, U2, V2, W2Frame sizeTighteningtorqueN·mBolt sizemm2TighteningtorqueN·mBolt sizeMax. wire sizemm230…44M1022.1M10 (3/8")3×300 MCMR630…44M1022.1M10 (3/8")3×500 MCMR730…44M1051.6M12 (7/16")2×(3×300 MCM)R830…44M1051.6M12 (7/16")2×(3×500 MCM)R930…44M1051.6M12 (7/16")4×(3×300 MCM)R1030…44M1051.6M12 (7/16")4×(3×500 MCM)R11Technical data 161
