Final placementMove the cabinet into its final position with an iron bar.Place a wooden piece at the bottom edge of the cabinetin order not to damage the cabinet frame with the ironbar.Attaching the cabinet to the floor and wall or roof￭ General rules• Install the drive cabinet in an upright vertical position with its back against a wall (a), orback-to-back with another cabinet (b).• Leave 400 mm (15.75 in) free space above the basic roof level of the cabinet for cooling.IP54 (UL Type 12) fan replacement requires 320 mm (12.6 in) free space above.• Leave some space at the side where the cabinet outmost hinges are to allow the doorsto open sufficiently (w). The doors must open 120° to allow the drive module replacement.ab120°w> 400 mm (15.75”)Mechanical installation 51
