About this manual20If the drive will be connected to a common DC bus, see ACS800 Single DriveCommon DC Configurations Application Guide [3AFE64786555 (English)].Common chapters for several productsChapters Safety instructions, Planning the electrical installation and Motor controland I/O board (RMIO) apply to several ACS800 products which are listed at thebeginning of the chapters.Categorization according to the frame sizeSome instructions, technical data and dimensional drawings which concern onlycertain frame sizes are marked with the symbol of the frame size R2, R3, ... or R8.The frame size is not marked on the drive designation label. To identify the framesize of your drive, see the rating tables in chapter Technical data.The ACS800-11/U11 is manufactured in frame sizes R5 and R6.Categorization according to the plus codeThe instructions, technical data and dimensional drawings which concern onlycertain optional selections are marked with plus codes, e.g. +E202. The optionsincluded in the drive can be identified from the plus codes visible on the typedesignation label of the drive. The plus code selections are listed in chapter TheACS800-11/U11 under Type code.ContentsThe chapters of this manual are briefly described below.Safety instructions give safety instructions for the installation, commissioning,operation and maintenance of the drive.About this manual lists the steps in checking the delivery and installing andcommissioning the drive and refers to chapters/sections in this manual and othermanuals for particular tasks.The ACS800-11/U11 describes the drive.Mechanical installation instructs in how to place and mount the drive.Planning the electrical installation instructs in the motor and cable selection,protections and cable routing.Electrical installation shows how to wire the drive.Motor control and I/O board (RMIO) shows the external control connections to theI/O board.Installation checklist contains a list for checking the mechanical and electricalinstallation of the drive.
