Safety instructions8Mechanical installation and maintenanceThese instructions are intended for all who install and service the drive.WARNING! Ignoring the following instructions can cause physical injury or death,or damage to the equipment:ï Handle the unit carefully.ï ACS800-01, ACS800-11, ACS800-31: The drive is heavy. Do not lift it alone.Do not lift the unit by the front cover. Place the unit only on its back.ACS800-02, ACS800-04: The drive is heavy. Lift the drive by the lifting lugsonly. Do not tilt the unit. The unit will overturn from a tilt of about 6 degrees.Use extreme caution when manoeuvring a drive that runs on wheels. Anoverturning unit can cause physical injury.ï Beware of hot surfaces. Some parts, such as heatsinks of powersemiconductors, remain hot for a while after disconnection of the electricalsupply.ï Make sure that dust from drilling does not enter the drive when installing.Electrically conductive dust inside the unit may cause damage ormalfunctioning.ï Ensure sufficient cooling.ï Do not fasten the drive by riveting or welding.Do not tilt!Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
