Installation86Power cable connection procedureWARNING! Follow the instructions in chapter Safety instructions. Ignoring theinstructions can cause physical injury or death, or damage to the equipment.1. Lead the input cables into the inside of the cabinet. Ground the cable shield 360°at the lead-through plate.2. Twist the cable shields of the input cables into bundles and connect them and anyseparate ground conductors or cables to the PE (ground) terminal of the inputpower cabling panel.3. Connect the phase conductors of the input cables to terminals U1, V1 and W1 ofthe input cabling panel. For the tightening torques, see page 129.4. Lead the motor cables into the inside of the cabinet. Ground the cable shield 360°at the lead-through plate.5. Twist the cable shields of the motor cables into bundles and connect them andany separate ground conductors or cables to the PE (ground) terminal of theoutput power cabling panel.6. Connect the phase conductors of the motor cables to terminals U2, V2, W2 of theoutput cabling panel. For the tightening torques, see page 129.
