Introduction to the manual 23Quick installation, start-up and operating flowchartTask SeePlan the electrical installation and acquire theaccessories needed (cables, fuses, etc.).Check the ratings, required cooling air flow, inputpower connection, compatibility of the motor,motor connection, and other technical data.Planning the electrical installation(page 59)Technical data (page 149)Check the installation site. Ambient conditions (page 202)Unpack and examine the units (only intact unitsmay be started up).Examine that all necessary optional modules andequipment are present and correct.Mount the drive.Mechanical installation (page 42 or 45)If the drive has been non-operationalfor more than one year, the converterDC link capacitors need to bereformed (page 146)Route the cables. Routing the cables (page 77)Check the insulation of the supply cable, themotor and the motor cable.Checking the insulation of theassembly (page 91)Connect the power cables.Connect the control cables.Connecting the power cables (page94), Connecting the control cables(page 110)Check the installation. Installation checklist (page 127)Start the drive up. Start-up (page 129)Operate the drive: start, stop, speed control etc. ACS880 quick start-up guide, firmwaremanual
