ABB IEC 60870-5-103 Communication Protocol Manual

Also see for IEC 60870-5-103: Communication protocol manual Communication protocol manual

Contents

Name Type Default Description23_GRP1 BOOLEAN 0 Information number 23, setting group 1 is active24_GRP2 BOOLEAN 0 Information number 24, setting group 2 is active25_GRP3 BOOLEAN 0 Information number 25, setting group 3 is active26_GRP4 BOOLEAN 0 Information number 26, setting group 4 is active4.1.6.4 SettingsPID-3975-SETTINGS v5Table 20:I103IED Non group settings (basic)Name Values (Range) Unit Step Default DescriptionFunctionType 1 - 255 - 1 1 Function type (1-255)4.1.6.5 Supported information typesTerminal status indications in monitor direction, I103IED M11874-109 v7Indication block for status in monitor direction with defined IED functions.Number of instances: 1Function type is selected with parameter FunctionType.Information number is defined for each input signals.Table 21:I103IED supported functionsINF Description19 LED reset21 TestMode22 Local Parameter setting23 Setting group 1 active24 Setting group 2 active25 Setting group 3 active26 Setting group 4 active4.1.7 Supervison status for IEC 60870-5-103 I103SUPERV4.1.7.1 Functionality GUID-E7A28D8D-398E-437C-9B58-AE125BC38058 v1I103SUPERV is a function block with defined functions for supervision indicationsin monitor direction. This block includes the FunctionType parameter, and theinformation number parameter is defined for each output signal.1MRK 511 394-UEN A Section 4IEC 60870-5-103 vendor specific implementation670 series 2.2 IEC 35Communication protocol manual