2 Installation and commissioning2.0.1 Transporting and Unpacking3HAC021111-001 Revision: B 312: Installation and commissioning2.0.1 Transporting and UnpackingNB!Before starting to unpack and install the robot, read the safety regulations and otherinstructions very carefully. These are found in separate sections in the User’s Guide andProduct manual.The installation shall be made by qualified installation personnel and should conformto all national and local codes.When you have unpacked the robot, check that it has not been damaged during trans-port or while unpacking.OperatingconditionsStorageconditionsIf the equipment is not going to be installed straight away, it must be stored in a dry area atan ambient temperature between -25°C and +55°C.When air transport is used, the robot must be located in a pressure-equalized area.Weight The net weight of the manipulator is approximately: 225 kgParameter ValueAmbient temperature +5º to +45ºRelative humidity Max. 95% at constant temperature
