Table 166:Station authority level “L,R,L+R” using R/L buttonL/R Control L/R Control status Control accessR/L button CTRL.LLN0.LocSta CTRL.LLN0.MltLev L/R stateCTRL.LLN0.LocKeyHMILocal user IEC 61850 client 1)Local N/A FALSE 1 xRemote N/A FALSE 2 xLocal + Remote N/A TRUE 4 x xOff N/A FALSE 01) Client IEC 61850 command originator category check is not performed.Table 167:Station authority “L,R,L+R” using CONTROL function blockL/R Control L/R Control status Control accessControl FB input CTRL.LLN0.LocSta CTRL.LLN0.MltLev L/R stateCTRL.LLN0.LocKeyHMILocal user IEC 61850 client 1)CTRL_OFF N/A FALSE 0CTRL_LOC N/A FALSE 1 xCTRL_STA N/A FALSE 0CTRL_REM N/A FALSE 2 xCTRL_ALL N/A TRUE 4 x x1) Client IEC 61850 command originator category check is not performed.3.16.11.6 Station authority level “L,S,R”Station authority level “L,S,R” adds station control access. In this level IEC 61850command originator category validation is performed to distinguish controlcommands with IEC 61850 command originator category set to “Remote” or“Station”. There is no multilevel access.IEDIEC 61850remoteIEC 61850stationIEC 61850remoteIEC 61850remoteIEC 61850remoteIEDIEC 61850stationIEDIEC 61850stationIEDIEC 61850stationOFFLOCAL REMOTE STATIONGUID-7BC51FAF-B097-4CD9-AFF4-6D1F3D548C7F V1 ENFigure 100: Station authority is “L,S,R”Section 3 1MRS758755 ABasic functions156 REC615 and RER615Technical Manual
