4.6.1.6 SignalsTable 477:DPSRDIR Input signalsName Type Default DescriptionU1 REAL 0.0 Positive sequence voltageI1 REAL 0.0 Positive sequence currentBLOCK BOOLEAN 0=False Block signal for activating the blocking modeTable 478:DPSRDIR Output signalsName Type DescriptionRELEASE BOOLEAN Release signal if direction criteria is satisifiedDIRECTION Enum Direction information4.6.1.7 SettingsTable 479:DPSRDIR Group settings (Basic)Parameter Values (Range) Unit Step Default DescriptionRelease delay time 0...1000 ms 1 10 Release delay timeCharacteristic angle -179...180 deg 1 60 Characteristic angleMax forward angle 0...90 deg 1 88 Maximum phase angle in forwarddirectionMax reverse angle 0...90 deg 1 88 Maximum phase angle in reversedirectionMin forward angle 0...90 deg 1 88 Minimum phase angle in forward directionMin reverse angle 0...90 deg 1 88 Minimum phase angle in reverse directionDirectional mode 1=Non-directional2=Forward3=Reverse2=Forward Directional modeTable 480:DPSRDIR Non group settings (Basic)Parameter Values (Range) Unit Step Default DescriptionOperation 1=on5=off1=on Operation Off / OnMin operate current 0.01...1.00 xIn 0.01 0.10 Minimum operating currentMin operate voltage 0.01...1.00 xUn 0.01 0.30 Minimum operating voltageTable 481:DPSRDIR Non group settings (Advanced)Parameter Values (Range) Unit Step Default DescriptionReset delay time 0...60000 ms 1 20 Reset delay timeSection 4 1MRS758755 AProtection functions456 REC615 and RER615Technical Manual
