ABB SAS-W1.1E System Manual

Also see for SAS-W1.11E: System manual

ABB SAS-W1.1E System Manual Manual pdf 12 page image

BUS C H- /AB B- S ECU R E @ HO M E2CSM 6 0072 7D0 9 01 12 /56To arm the entire intrusion system using the keypad:1. Log in as a level 2 user2. The central unit will automatically display the "Arm/Disarm" icon Press OK. Select allzones3. Then press OK4. Using the arrow keys, select:- Arm Away to arm the system in Arm Away al mode,- Arm Stay to arm the system in Arm Stay mode,- Notification to arm the system in Notification mode,and confirm your selection using the ok key.The central unit will beep 3 time and the intrusion alarm zones will be armed.If any event reports are stored in the memory, the zones will not be armed. Instead, the firstunseen event in the memory will be displayed. Select System or Devices to view all events, orthe Force Block item to arm the alarm system anyway (for more information see the followingparagraph Forced Block Arming)3.1.3 Global disarmingGlobal disarming of the intrusion system can only be performed by Users (PIN level 2) and bythe Installer (PIN level 3 - if authorised by a level 2 User) that has permission on all the zones.To disarm the entire intrusion alarm system using the keypad:1. Repeat points 1 and 2 from the previous paragraph2. Select "Disarmed".The central unit will beep 1 time and the intrusion alarm system will be disarmed.3.1.4 Partial armingThe partial arming of the intrusion system can only be performed by Users (PIN level 2) andby the Installer (PIN level 3 - if authorised by a level 2 User) on the zones for which they havebeen authorized.Arm/DisarmAll zonesZone AZone BArm Away >