ABB SAS-W1.1E System Manual

Also see for SAS-W1.11E: System manual

ABB SAS-W1.1E System Manual Manual pdf 21 page image

BUS C H- /AB B- S ECU R E @ HO M E2CSM 6 0072 7D0 9 01 2 1 /56Deactivate 80Command 6 Activate 91Deactivate 905. If the command is not recognised, the central unit will respond with the voice mes-sage "Incorrect command" and repeat the procedure from point 5.If the command is recognised, the central unit will respond with the voice message"Confirm?" Press the * key to confirm.6. The central unit will execute the command and send a confirmation voice message:"Command executed".The central unit will repeat the procedure from point 5 to accept other commands. If no othercommands need to be sent, hang up the telephone to end the communication, or enter thenext command. Communication is automatically interrupted after one minute.6.2 SMS CommandsIn order to accept SMS commands, the number placing the call must be included amongthose stored in the central unit, and obviously must not be hidden. If the number is not in-cluded in the list, or is hidden, the central unit will ignore the request.Privileges to operate the central unit are guaranteed using the same ID-password systemused to perform authentication on the central unit keypad. All commands require authentica-tion, with the exception of status requests and the scene.Level 2 users can send SMS commands.Commands are sent using coded SMS messages, to which the central unit replies with a re-sponse SMS or clear confirmation, unless it has been specifically instructed not to send a re-sponse.A separate SMS must be sent for each command.The general structure of the command is:[command] [what] [mode] [user + PIN]Command What Mode User + PINArm SystemZone nameHome-modeAway-modeNotification6-digits numericalcodeDisarm SystemZone name6-digits numericalcodeScene # (1-10)StatusThe answer/confirmation SMS is as follows:Zone A (*) Away-modeZone B Away-modeZone C Home-modeZone D Home-mode- The star (*) indicates a zone anomaly: the detail of the anomaly is explicated in the centralunit or by connecting to free@home;- Up to 4 zones, the control unit sends 1 SMS;- Beyond the 4 zones, the control unit sends 2 SMS;- The technological zone (24h) will not be listed as it is always active.