ABB SAS-W1.1E System Manual
Also see for SAS-W1.11E: System manual
                                                        | |
Contents
| 
BUS C H- /AB B- S ECU R E @ HO M E2CSM 6 0072 7D0 9 01 45 /56Technical support VOICE / SMSNo 230V (*) VOICE / SMS230V return VOICE / SMSTechnological VOICE / SMS Technological zoneContact ON VOICE / SMS Technological zonePeriodic GSM inspections VOICE (**)Low Battery VOICE / SMSCentral unit Battery VOICE / SMSInput VOICE / SMSDisarming VOICE / SMSJamming VOICE / SMSHardware Fault VOICE / SMSRadio Fault VOICE / SMSVOICE indicates a voice message, SMS indicates a text message.(*) after 15 minutes of continuous power outage (maximum delayed allowed underEN50131-1 and EN50131-3 standards is 60 min.)(**) Performed once a day (6pm). Removal of the event on all telephones invalidatesthe EN50136-2 standard.WARNING!SMS delivery time is determined by the telephone operator network service. Assuch, there is no guarantee that it will be delivered promptly.12.6.1 Customised messageSelect Record message. The list of messages will appear. Up to 9 different messages can berecorded, each 14 seconds long.If programmed, the personal message can be played after the specific pre-recordedmessage that the central unit sends after an event.The message should always indicate where the reported event occurred. E.g. a ge-neric customised message might say “in Mario Rossi's house, via Roma 15, Milan”.Select the number corresponding to the message that you wish to record. The recording win-dow will open.Audio Message1 > |
Related manuals for ABB SAS-W1.11E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine