ADTRAN 6000 Series System Manual

Also see for TRACER 6000 SERIES: User manual

Contents

ADTRAN 6000 Series System Manual Manual pdf 82 page image

Section 5 User Interface Guide TRACER 6000 Series Integrated System Manual82 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F> M ANAGEMENT /SNMP PORT C ONFIGURATION > SNMP G ET COMMUNITYDefines the community name for Get access (to poll the TRACER 64x0 for status information). This valuemust match the Get name defined on the network management stations (NMS). Get access is read onlyaccess. The default name is public.> M ANAGEMENT /SNMP PORT C ONFIGURATION > SNMP P UT C OMMUNITYDefines the community name for Set access (to change TRACER 64x0 configuration parameters throughSNMP). This value must match the Get or Set name defined on the NMS. The default name is private.> M ANAGEMENT /SNMP PORT C ONFIGURATION > SNMP TRAP COMMUNITYDefines the community name for trap destinations. This name must match the community name defined onthe NMS. The default name is SNMP_trap.> M ANAGEMENT /SNMP PORT C ONFIGURATION > SNMP TRAP HOST #0 - #4Identifies the IP address in dotted decimal notation of the NMS for the TRACER 64x0 to send SNMP trapsto. Up to five trap destinations can be entered.> PING U TILITYFigure 32 shows the Ping Utility menu page, which contains the parameters for performing a ping test outof the 10/100BaseT/TX MGMT Ethernet interface.Figure 32. Ping Utility> PING U TILITY > P ING A DDRESSSpecifies the IP address to ping (in dotted decimal notation).