Chapter 2. Installation61200239L1-20 Express 3010/3110 User Manual 2-7After installation is complete, the Express 3010/3110 resets the ISDNline for a clean start. Therefore, the PWR/LINE LED may not be onsolid (indicating link up) for a few more seconds. In the few caseswhere the procedure does not succeed, a window will pop up,prompting you to enter the SPIDs.VT 100 TERMINAL EMULATIONThe Express 3010/3110 can be configured using any communicationspackage supporting VT 100 terminal emulation. Instructions for VT100 configuration are given in VT 100 Configuration on page 2-8 and inChapter 3, Application Configuration. The main branches of the VT 100menu tree and their hot keys (the keys you press to go to a particularmenu) are as follows:Ensure that the communications package is configured to pass theseControl Sequences through to the Express.To exit a menu, you can press Ctrl + X. The Ctrl + X command alsoplaces the unit back on-line if a call is connected.Some features in the Express 3010/3110 do not immediately take ef-fect upon selection. This prevents unintentional reconfiguration of theExpress 3010/3110 during an active call. Items such as Protocol andCall Type take effect only at the beginning of a new call.Menu: Hot Keys:CONFIG (Ctrl + C)DIAL (Ctrl + D)STATUS (Ctrl + V)TEST (Ctrl + T)
