ADTRAN Express 3010 Manual 

Contents

ADTRAN Express 3010 Manual  Manual pdf 40 page image

Chapter 3. Application Configuration3-4 Express 3010/3110 User Manual 61200239L1-20Auto AnswerPress the number corresponding to Auto Answer and press Enter toview the Auto Answer options: Disabled, Enabled, and Dump AllCalls. Press the number corresponding to the desired options; thenpress Enter.DisabledWhen Disabled is selected, the Express will not answer the call. AnAT answer command (ATA) must be issued to the Express before itaccepts the incoming call. The ringing call can be dumped using theHang up line command.EnabledWhen Enabled is selected, the Express will accept an incoming datacall on the primary phone number (SPID1, LDN1). If that call is aBONDING call, then another incoming call is accepted on the second-ary phone number (SPID2, LDN2).Dump all callsWhen Dump all calls is selected, the Express will not accept any in-coming calls, keeping the line clear for outgoing calls.Call ScreeningCall Screening allows the Express to answer all incoming calls (1) An-swer Any) (default) or only calls originating from phone numbersstored in the DIAL menu as stored numbers SN0 through SN9 (2) An-wer if SN0 .. 9).When Call Screening is set to answer any numbers stored in SN0through SN9, an incoming call is not answered if the Call ID receivedfrom the switch does not match a stored number. Depending on theswitch type, the Call ID may be presented in either a seven- or ten-dig-it format. The Express displays the Call ID for all dumped calls in theStatus buffer.