Chapter 3. Application Configuration3-14 Express 3010/3110 User Manual 61200239L1-20CONFIGURING THE EXPRESS USING PRO-FILES (QUICK SETUP)To configure the DTE Options quickly and easily, use the Profilesmenu to automatically set up the most common DTE configurations.Press the number corresponding to Profiles and press Enter to displaythe Profiles options:For fine-tuning a particular application and DTE settings, see the sec-tion Options for both Leased and Switched ISDN Service on page 3-8. Thissection provides detailed step-by-step processes for configuring theDTE Options.Most Internet service providers supporting ISDN also support PPPprotocol. If connecting to an Internet service provider using one B-channel, select Internet 64K, which sets the protocol to PPP. If ar-rangements have been made with the Internet service provider to usetwo B-channels, select Internet 128K, which uses multilink PPP proto-col.Loading a factory profile has no effect on any SPID(s), ISDN PhoneNumber(s), or Switch Type settings already configured. The settingsthat are altered when applying a profile are shown on the followingpages.Default Dial V120 asynDial 56k Sync Dial Bond asynDial 64k Sync Internet 64kDial 112k Sync Internet 128kDial 128k Sync Remote 64kLeased 128k (Express 3010 only) Remote 128kLdm 128 Master (Express 3010only)Leased V.120 (Express3010 only)
