ADTRAN GPON 452 Physical Installation Manual

Also see for 1287802F1: Quick start

Installation61287802F1-34B 25Revision B■ A telephony/data communication test set■ PON power meter preferably with wave length filtering■ Fiberscope or videoscope■ Optical Time Domain Reflector meter calibrated for 1310 and 1490 nm output■ Composite fiber cable for non-connectorized installation■ ONT mounting hardware■ Silicone sealant (and application material such as cotton swabs)■ Bonding clamp for grounding and securing the composite cable on non-connectorizedinstallations■ 1 each, 60” Hi-cap riser pipe (for composite cable installation)■ Tie wraps■ TexWipe TM Alco pad for fiber cleaning■ TexWipe TM cloth for fiber cleaningIncluded with the GPON 452/454 packaging are 2/4 Two-screw Terminal Bridges- 2 for the452 and 4 for the 454; fiber cable management and strain relief; a fiber connector; andelectronics/optics. For data and video over IP, the connection to the SFU is through the RJ-45Ethernet connector. For POTS, the connection is made through 2/4 Two-screw TerminalBridges (i.e., 2 for the 452 and 4 for the 454) or RJ-11 connections.5.2.1 Necessary SuppliesMake sure you have access to the following supplies:■ Appropriate surface anchors for mounting the ONT (each anchor rated to 15 lbs minimum)■ Assorted tie wraps for securing cabling and wiring■ SC/APC fiber connectors