Features and MenuCards Main Menu1065ƒRemote divert: This function allows you to configure call forwarding forother users’ call numbers. You must have “Call forwarding for other user” authori-sation to be able to do this, otherwise this menu item will not be displayed on yourterminal. You can also only configure call forwarding for users whose terminal hasnot been blocked for this type of access (users themselves have authorisation to“Prevent call forwarding by other user”). Please consult your system administratorif you have any questions about these authorisations.Enter the internal number that you want to forward or select a number from thetelephone book. The rest of the procedure is the same as configuring the “Divertphone” function (see page 104).6ƒFollowƒme: This type of call forwarding is configured on another than yourown terminal. The user’s PIN number for the source telephone is required for thisfunction (see page 111). On the other terminal, select the 6ƒFollowƒme itemfrom the Call forwarding MenuCard. As Source, enter the internal callnumber for which calls are to be forwarded to this telephone. Then enter the PIN:of the source telephone. You can switch off the “Follow Me” function with On /Off.You can switch off the “Follow Me” function on the other (source) telephone byswitching off the “Divert phone” function.If the “Follow Me” function is active, all the call numbers of the other telephone areforwarded immediately (with the exception of hunt group numbers).6.2.4 MenuCard “Messages”M P Select 3ƒMessages, followed by …1ƒShort messages: Short messages can be exchanged between users withsystem terminals. When a message arrives, an extra window containing details onthe sender is shown for four seconds (on the system terminal’s display).■ 1ƒReceived mail: A list of senders of messages is displayed.– Show: Select an entry and press O. You will see the message’s “Subject”text, sender and date.– Forward: Select an entry. You can now edit the text of the message.Press O. Enter the internal number of the user you want to forward the
