Telephoning Enquiry, Toggling, Transfer and Conference662.5 Enquiry, Toggling, Transfer and Conference2.5.1 Enquiry/Toggling by means of the R-Key orAnother Call Key2.5.2 Transferring an Internal/External Call to anInternal SubscriberYou have dialled an internal enquiry call (see the section entitled Enquiry/Togglingby means of the R-Key or Another Call Key on page 66).R During a call, press the R-key (display in the info line) and:Z Dial the internal or external call number (for manually-seizedtrunk calls with the line seizure code digit, e. g. 0, seepage 55).or:g Press another call key to place an enquiry call with a teammember.The original call is put on hold while you are consulting withthe third person.g To toggle (i.e. switch backwards and forwards between thetwo calls), press the key of the held subscriber (the LED ofthis call key flashes and the arrow symbol is displayed).h/T End enquiry/toggling by replacing the handset or pressingthe disconnect key.g/R Then press the key of the call on hold.G You are now reconnected to the caller who was on hold.G h When the subscriber answers, inform them of the calltransfer and hang up.h If the subscriber does not answer, hang up; the subscriber iscalled.
