Monitoring Control of Alarmed Conditions13-2 User Manual ML700Control of Alarmed ConditionsNOTE: The alarms and recommended troubleshooting procedures are described in detail in AppendixF - Alarms Troubleshooting (on page F-1).The status of each NE in the Topology Tree and the status of the NE items (in the NetworkElement tree) are indicated by various colored icons adjacent to the unit. Every time an alarmis generated by any NE it is displayed in the bottom window area where active alarms fromall NEs are displayed, as well as in the Alarms pane of the relevant Network Element. Inaddition, alarms that are no longer active (history) can be viewed in the Alarms pane of therelevant NE.The following figure summarizes the available alarm displays. Currently active alarms for a connected NE and its hosted NEs (if the connected NE is aCO) - displayed at the bottom of the window area. Highest level alarm per NE - in the Topology Tree. Active alarm per NE item (i.e. HSL, Modem, etc.) - in the Network Element tree. Thisenables identifying the general source of the alarm. All (active and history) alarms for a selected NE from the Navigation tree - via theAlarms pane of the selected NE (Alarms Pane View (on page 13-5)).
