Management Configuration System Name Configuration3-20 User Manual ML700System Name ConfigurationEach ML system is assigned the Serial Number identification supplied on a sticker on thedevice. This number is also reported, by factory default, as the System ID (TL1 TID) andSystem Name (SNMP) ( SNMP Agent Configuration (on page 3-15)). This serial numericalvalue can be changed to a logical system name. To assign a logical system name1. In the Network Element tree, select System. The System pane opens in the work area.2. In the Configuration area, click Set System ID. The Set System ID dialog appears.3. In the System ID field, type the new system name. This will be the TL1 TID. Range: upto 20 alphanumeric characters.4. To assign the logical name to the system in SNMP, enable Apply to SNMP SystemName. Unless this box is enabled, the SNMP System Name will be displayed as theserial number.5. Click OK.
