2-19Installing the HardwareConfiguring the AAA-131U2/133U2After connecting all devices, reinstall the computer cover and con-nect all power cables. Turn on the external SCSI devices first, andthen turn on the computer. During BIOS initialization, theAAA-131U2/133U2 BIOS banner should appear on the screen, andeach device connected to the adapter should be listed. If the BIOSbanner does not appear, see Appendix B, Troubleshooting.Before installing the drivers and software for the AAA-131U2/133U2 RAID card, you may want to configure SCSI options (e.g., ID,Parity Checking, and Termination) for the card and the SCSI devicesconnected to it by running the onboard SCSISelect utility. To do thispress F6 when the following prompt appears during BIOSinitialization:Press for SCSISelect (TM) Utility!In most cases, it is not necessary to run the SCSISelect utility. Shouldyou need to configure SCSI options, see Appendix A, Using SCSISelectand Disk Utilities for additional information.r
