Adaptec AAA-133U2 - AAA 133 RAID Controller Hardware Manual Manual pdf 64 page image
Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Adaptec AAA-133U2 - AAA 133 RAID Controller Hardware Manual

Also see for AAA-130U2 SERIES: Installation and hardware guide

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 previewPage 18 previewPage 19 previewPage 20 previewPage 21 previewPage 22 previewPage 23 previewPage 24 previewPage 25 previewPage 26 previewPage 27 previewPage 28 previewPage 29 previewPage 30 previewPage 31 previewPage 32 previewPage 33 previewPage 34 previewPage 35 previewPage 36 previewPage 37 previewPage 38 previewPage 39 previewPage 40 previewPage 41 previewPage 42 previewPage 43 previewPage 44 previewPage 45 previewPage 46 previewPage 47 previewPage 48 previewPage 49 previewPage 50 previewPage 51 previewPage 52 previewPage 53 previewPage 54 previewPage 55 previewPage 56 previewPage 57 previewPage 58 previewPage 59 previewPage 60 previewPage 61 previewPage 62 previewPage 63 previewPage 64 previewPage 65 previewPage 66 previewPage 67 previewPage 68 previewPage 69 previewPage 70 previewPage 71 previewPage 72 previewPage 73 previewPage 74 previewPage 75 previewPage 76 previewPage 77 previewPage 78 previewPage 79 previewPage 80 previewPage 81 previewPage 82 preview
Contents
  1. Table Of Contents
  2. Table Of Contents
  3. obtaining scsi cables
  4. System Requirements
  5. system requirements
  6. installation overview
  7. installing the hardware
  8. AAA-131U2/133U2 RAID Card Layout
  9. Installing DIMM Memory
  10. Installing the AAA-131U2/133U2
  11. Connecting the LED Activity Indicator
  12. Setting Up SCSI Devices
  13. Terminate the Ends
  14. Additional Hints for Connecting SCSI Devices
  15. Connecting SCSI Devices
  16. Internal Ultra2 SCSI Connector (68-pin)
  17. Internal Ultra SCSI Connector (50-pin)
  18. External Ultra2 SCSI Connector (68-pin)
  19. External SCSI Array Enclosures (Storage Subsystems)
  20. Configuring the AAA-131U2/133U2
  21. Creating an Array
  22. Creating an Array with Custom Setup
  23. Making the Array Bootable
  24. installing the software
  25. Installing the Array1000U2 Driver for Windows NT
  26. Installing the Driver When Windows NT is Already Installed
  27. Windows NT Installation and Configuration Notes
  28. Installing the Array1000U2 Driver for Novell NetWare
  29. Installing the Driver When NetWare is Already Installed
  30. Netware Installation and Configuration Notes
  31. Installing the Array1000U2 Driver for UnixWare
  32. Installing the Driver When Installing SCO UnixWare
  33. SCSISelect Default Settings
  34. Starting the SCSISelect Utility
  35. Using the SCSI Disk Utilities
  36. SCSISelect Settings
  37. Additional Options
  38. Troubleshooting Checklist
  39. Windows NT Troubleshooting
  40. Using a CD-ROM Drive with DOS
  41. External Cables
  42. External Connector Diagrams
Adaptec AAA-133U2 - AAA 133 RAID Controller Hardware Manual Manual pdf 64 page image
A-2AAA-130U2 Series Installation and Hardware GuideSCSISelect Default SettingsThe SCSISelect default settings for the AAA-131U2/133U2, listed inthe table below, are appropriate for most systems. If you want toview and/or change the current settings, or if you would like to for-mat or verify a disk, see Starting the SCSISelect Utility on page A-3.Detailed descriptions of each setting begin on page A-5.SCSISelect Option Available Settings Default SettingsSCSI Bus Interface DefinitionsHost Adapter SCSI ID 0-15 7SCSI Parity Checking Enabled/Disabled EnabledHost Adapter SCSI TerminationChannel A:ULTRA2-LVD/SE ConnectorFast/Ultra-SE ConnectorChannels B & C:(AAA-133U2 only)Auto/Enable/DisableEnable/DisableEnable/DisableAutoEnableEnableSCSI Device ConfigurationInitiate Sync Negotiation Yes/No Yes (Enabled)Maximum Synchronous Transfer Rate 80.0 1, 53.3 1, 40.0,32.0, 26.6, 20.0,16.0, 13.4, 10.01 If Initiate Wide Negotiation is set to No, this setting is not available.80.022 If Initiate Wide Negotiation is set to No, the default setting is 40.0.Enable Disconnection Yes/No Yes (Enabled)Initiate Wide Negotiation Yes/No Yes (Enabled)Send Start Unit Command Yes/No Yes (Enabled)Include In BIOS Scan Yes/No Yes (Enabled)Additional OptionsArray1000U2 BIOS Enabled/Disabled EnabledBIOS Support for Bootable CD-ROM Enabled/Disabled Enabled
/ 82
Related manuals for Adaptec AAA-130U2 SERIES
Adaptec NCLV-DS User Manual first page preview
Adaptec NCLV-DS User Manual
Adaptec APD-2940UW User Manual first page preview
Adaptec APD-2940UW User Manual
Adaptec LSM-FC2002 Installation Manual first page preview
Adaptec LSM-FC2002 Installation Manual
This manual is suitable for:
AAA-130U2 SERIESAAA-133U2
Manuals database logo
manualsdatabase
Your AI-powered manual search engine