6-1Át t t tInstalling the SoftwareDriver for SCO UnixWareIn this ChapterThis chapter explains how to install the AAA-131U2/133U2 soft-ware driver (cda1000) for SCO UnixWare 7.0. Before installing thedriver, make sure you have completed the following:n Installed the AAA-131U2/133U2 in your system.(See Chapter 2)n Created the first array using the ARRAYCONFIG U2 utility, ifyou plan to boot from an array. (See Chapter 3)Once UnixWare and the driver are installed, install Adaptec CI/OManagement Software from the server’s X Window (CI/O isrequired for array management in order to provide the proper levelof fault tolerance and event notification). Refer to the Adaptec CI/OManagement Software User’s Guide for instructions on installing andusing the software.äInstalling the Array1000U2 Driver for UnixWare 6-2
