5-4AAA-130U2 Series Installation and Hardware Guide15 Selectcda1000h.ham and press Enter.16 When prompted to save existing filec:\nwserver\nbi.nlm, selectNo.17 When prompted to save existing filec:\nwserver\nwpaload.nlm, select No.18 When prompted to save existing filec:\nwserver\nwpa.nlm,select No.19 When prompted, select Select/Modify driver parameters.20 Enter a valid slot number, then press Enter to save field data.21 Press F10 to save parameter settings.22 When prompted, select Save parameters and continue.23 Select No when prompted to select an additional disk driver.24 Select Continue Installation.25 When NetWare installation is complete, install Adaptec CI/OManagement Software from the server console. Refer to theAdaptec CI/O Management Software User’s Guide for instructionson installing and using the software.Note: To load the driver automatically at server bootup,make sure thestartup.ncf file includes the load commandline for thecda1000h.ham driver. (If you also have anAdaptec host adapter that uses the Adaptecaic78xx.dskdriver, make sure the driver loads after thecda1000h.hamdriver.)
