5-5Installing the Software Driver for Novell NetWareNote: Older versions of theaic78xx.dsk driver (before v1.30)are compatible withcda1000h.ham as long as theAAA-131U2/133U2 PCI slot is not specified on the com-mand line (e.g., load aic7870.dsk slot=z). If there is anAIC-78xx based card (e.g., AHA ™ -2940) in the system, zmust point to that card’s slot number and not to theAAA-131U2/133U2 slot number. If loaded without com-mand line parameters, NetWare lists valid slot numbers.The AAA-131U2/133U2 will be listed in the parameter list;however, do not select it.NetWare 5.0Follow these instructions only if you are installing NetWare 5.0 forthe first time:1 Create a DOS partition and install DOS on your.2 Copy theaspi8u2.sys andaspicd.sys files from the\dos direc-tory on the Adaptec Array1000U2 Family Manager Set driverdisk to a directory (e.g.,c:\scsi) on your hard disk.3 When using a SCSI CD-ROM, edit theconfig.sys file to includecommand lines foraspi8u2.sys andaspicd.sys. The followingsample command lines for theconfig.sys file are appropriate formost systems:device=c:\scsi\aspi8u2.sys /ddevice=c:\scsi\aspicd.sys /d:aspicd0Note: For non-Ultra2 systems, useaspi8dos.sysinstead ofaspi8u2.sys in the command line (for exam-ple, device=c:\scsi\aspi8dos.sys /d).
