6-2controller Commandscontroller detailsTo display details about the currently opened controller andsoftware, use the controller details command. These detailsinclude the controller type and software revision levels.Syntaxcontroller detailsExamplesThe following example shows sample output as a result of using thecontroller details command:AAC0> controller detailsExecuting: controller detailsController Information----------------------Remote Computer: .Device Name: AAC0Controller type: Adaptec 2410SAAccess Mode: READ-WRITEController serial number: Last six digits = 8A277ANumber of Buses: 1Devices per Bus: 15Controller CPU: i960Controller CPU speed: 100 MhzController Memory: 144 MbytesBattery State: Not presentComponent Revisions-------------------CLI: 3.0-0 (Build #5523)API: 3.0-0 (Build #5523)Miniport Driver: 3.0-0 (Build #5131)Controller Software: 3.0-0 (Build #5478)Controller BIOS: 3.0-1 (Build #5523)Controller Firmware: (Build #5478)Controller Hardware: 3.3The following sections provide more information on the items thatthe controller details command displays.Device Name ItemThe Device Name: item displays the name of the controller. This isthe controller name specified when you opened the controller withthe open command. In the example, the controller name is AAC0.
