Adaptec RAID 2410SA Software Reference Manual

Contents

Adaptec RAID 2410SA Software Reference Manual Manual pdf 172 page image

6-13controller CommandsCommand And Switch AvailabilityThis command is supported on the following operating systems: Windows NT Windows 2000 (basic disk only) Windows XP (basic disk only) NetWareNotesThe controller automatically performs a rescan of the SCSI channelbefore the I/O is resumed.Using this command when there is a pagefile on an array couldcause unexpected behavior.Use of the controller pause_io command is not permittedwhile an array task is running on the controller. (Use the tasklist command to display a list of currently running array tasks.)Syntaxcontroller pause_io [{integer}]Parameters{integer}Specifies the amount of time, in seconds, to cause the controllerto wait before automatically resuming I/O.The parameter defaults to the maximum value of 150 seconds.This is necessary because the controller resume_iocommand may not be able to access the controller under somecircumstances.ExamplesThe following example pauses all I/O activity on the currentlyopened controller for 100 seconds:AAC0> controller pause_io 100Executing: controller pause_io 100