Aviom A-16CS User Manual

Also see for A-16CS: User guide

Contents

Aviom A-16CS User Manual Manual pdf 34 page image

24Aviom A-16R and A-16CS User GuidePersonalMixerPersonalMixerPersonalMixerPersonalMixerPersonalMixerA-16 D orA-16D ProA-Net Out from the A-16D or A-16D Pro is connected to each PersonalMixer’s A-Net In. Removing one Personal Mixer from the system hasno effect on other Personal Mixers being used.MixingThe process of creating a monitor mix using Aviom’s Monitor MixingSystem is similar to the process used to create a front-of-house mix.The Personal Mixer interface makes it easy to jump right in and createyour first mix within minutes of connecting the system for the firsttime.Mixing involves setting pan, volume, and mute status for eachChannel, and then saving this setup as a mix Preset so that you canrecall your mix later.The user interface of the A-16R and optional A-16CS are quite simpleto understand. As with many digital mixers, the A-16R Personal Mixerhas many Channels, but only one set of controls that are shared by allthe Channels. A Channel is selected by pressing one of the numberedChannel buttons on the Mixer’s front surface. When a Channel isselected, the red LED in the Channel’s button will light to indicate thatit has been selected and is ready to be edited.The procedure to edit a Channel involves only two steps:• Select the Channel you want to change.• Edit the volume, panning, or mute statusThat’s it. Each Channel can be edited by using the same simple steps.Note: Remember to save your new mix as a Preset to amemory location before turning the system off.Current unsaved edits to mix settings are not retainedwhen the A-16R is powered off.