Aviom A-16CS User Manual

Also see for A-16CS: User guide

Contents

Aviom A-16CS User Manual Manual pdf 70 page image

60Aviom A-16R and A-16CS User GuideflashPress any A-16R button to acknowledge the transfer status messageand return the A-16R to normal operation.Loading an All Preset File via MIDIAs when loading a single Preset via SysEx, to load an All Preset datafile the A-16R must first be placed into MIDI Recall Mode.The A-16R will remain in MIDI Recall until a valid A-16R MIDImessage is received, or until another front panel button is pressed toexit MIDI mode. MIDI SysEx information for other manufacturer’sdevices will pass through the A-16R and be ignored.To load an All Preset data file via SysEx:1. Set the A-16R front panel R EMOTE /L OCAL switch to theL OCAL position.2. Press the R ECALL button. The R ECALL button LEDflashes.3. Press the S OLO button to arm the A-16R for MIDIreception. The LED in the S OLO button will blink.4. Send the All Preset SysEx data file from your MIDIstorage device.5. The sixteen Presets are loaded into the A-16R internalmemory sequentially.6. The Mute LEDs will serve as a progress bar. TheLEDs will light in order from 1 to 16 as each Preset isreceived successfully.When the All Preset SysEx file transfer is complete, the systemwill display a status message to confirm that the data was receivedproperly. Two messages are possible:• Valid Data Received - all yellow Mute LEDs will flash• Invalid Data or MIDI Error - all red Channel LEDs willflashPress any A-16R button to acknowledge the transfer status messageand return the A-16R to normal operation.Exit MIDI ModeYou can exit an All Preset SysEx load operation by pressing any A-16Rfront panel button, or by changing the position of the Remote/Localswitch. Presets that have been successfully received prior to exitingthe SysEx recall mode will be preserved in the internal memory of