Adding Printers in Windows20 AXIS 5400+ / AXIS 5600+ User’s Manualclient computer that wants to print. Each client computer must install theappropriate printer drivers in order to print properly.SNMP Device Index When using the TCP/IP protocol (and if the printer driver permits), theprint server can use SNMP Status to find out if the printer is ready toaccept a new job. See “SNMP Device Index” on page 150.Adding printers in Windows 2000 / XP / 2003 using AXIS AddPrinter WizardAXIS AddPrinter is a Wizard that locates your network printers and helpsyou install them in your Windows environment. When you havecompleted the Wizard, the network printer is ready for use. To install anetwork printer you must be logged in as an Administrator or be amember of the Administrators' group.1. Install AXIS AddPrinter Wizard on all Windows 2000, Windows XP andWindows Server 2003 workstations that will print via the print server.2. Before you continue, ensure that the print server is properly connected tothe printer, network and power.3. Start AXIS AddPrinter. Click Next. The Wizard will perform an automaticsearch for all Axis network printers, which is indicated by the progress barat the bottom of the screen.4. Select a printer from the Select Network Printer list and click Next.If the printer does not appear, see Easy Access to All Network Printers,below.In Windows 98 and Me, AXIS Print Monitor must be installed on all (printing) clientcomputers for Peer-to-Peer printing.
