Axis 27981R1 User Manual

Contents

Axis 27981R1 User Manual Manual pdf 78 page image

Updating the Firmware78 AXIS 5400+ / AXIS 5600+ User’s Manual• Location of firmware and upgrade procedure: c:\Axis1. From www.axis.com, download the firmware and save it to a newdirectory on your computer, e.g. c:\Axis (if the directory does not exist,create it).2. Open a command prompt from Start => Run. The Run window will appear.Type cmd and click OK. (Windows 98: Type command and click OK.) The DOSCommand Prompt window will open.3. Make sure you are working from the correct directory:type cd c:\Axis and press Enter.4. Connect to the print server using ftp:type ftp 192.168.3.191 followed by Enter.(Example using print server IP address 192.168.3.191)5. Enter the user name, the default user is root. Press Enter. If the defaultpassword has been changed then it must also be entered. When you enterthe password, it will not be echoed to the screen, nor will the cursor move.6. Change to binary mode transfer.Type bin hash (or binary hash) and press Enter.7. Use the put command to upload the upgrade file to the flash location:(Example using firmware named 5400p_v2_7_00.bin):Type put 5400p_v2_7_00.bin FLASH followed by Enter. (Note that FLASHis written in capital letters!) A stream of hash (#) marks will appear.Wait 30 seconds... You will receive a message stating Transfer complete.Flash programming finished OK. The print server will restart in five secondsrunning the new software.When you see a new ftp prompt the procedure has been completedsuccessfully.8. Type bye followed by Enter to end the ftp session.Obtaining the SoftwareYou can obtain all the print server firmware as well as the latest utilitysoftware from the following locations:• http://www.axis.com• your local dealer