Axis 27981R1 User Manual

Contents

Axis 27981R1 User Manual Manual pdf 64 page image

Adding Printers in NetWare64 AXIS 5400+ / AXIS 5600+ User’s Manual7. Select the newly created queue from the queue list.8. Select Print Server Mode or Remote Printer Mode. If you selected PrintServer Mode, advance directly to step 11, otherwise continue with step 9.9. Select an appropriate NetWare Print Server name, that will be associatedwith the Axis Network Print Server, by using the Browse... button.Notes:10. If you want to define a remote printer number slot manually, check theManual box and type the desired number in the box.11. Click the OK button to return to the Network Environments window.Basic Queue-based printing over IPAxis print servers with software version 6.0 or later allow users to print ina Pure IP environment using traditional queue-based printing (whichusually uses the IPX transport protocol). Note that only NDS queue-basedprinting is supported.In the NetWare Pure IP environment, you must use the NetWareAdministrator to create the printer, print server and queue objects.Installing theAxis Network PrintServerFollow the instructions below to install the Axis Network Print Server inthe NetWare Pure IP environment:1. Start the Configuration Wizard from the User mode in the Axis NetworkPrint Server Web interface.2. Click your way through the Wizard until reaching the NetWare page.3. Set the parameters on the NetWare page:• PSERVER NDS Tree (example: NW5TREE)orPSERVER NDS File Server: (example: FILESERVERNAME)• PSERVER NDS Distinguished Name:(example: AXISXXXXXX., where is the containerwhere you want to create your print server)• You cannot type or edit the name manually.• Make sure that you have PSERVER.NLM running if you selected Remote Printer Mode in step8.