Management and Configuration84 AXIS 5400+ / AXIS 5600+ User’s ManualUsing AXIS ThinWizard for Print Server ManagementAXIS ThinWizard software allows you to manage and upgrade multipleAxis products. Using a standard Web browser, you can find, install,monitor, configure and upgrade your Axis print servers remotely in anyTCP/IP network. AXIS Thin Wizard 3.0 is Windows 2000 and WindowsXP compatible.Installing AXISThinWizardAXIS ThinWizard software is available on www.axis.comYou should only install AXIS ThinWizard on a designated computer onyour network.To install, follow the instructions given by the Installation Wizard. Duringthe installation, you will be asked to enter a user id and a password —these will be used when logging in to AXIS ThinWizard, so please take anote of them.Starting AXISThinWizardIf AXIS ThinWizard is installed on the workstation you can access itsWeb interface via Start | All Programs. If it is installed on anothercomputer, follow the instructions below:1. Make sure that the computer where you installed the AXIS ThinWizard isup and running on your network.2. Start a Web browser on a client in your network.3. Enter the IP address or the host name of the computer where you installedAXIS ThinWizard. (If the server is installed on another port than 80, you mustenter the port name after the host name or the IP address).4. The AXIS ThinWizard start page now appears in the Web browser. Enter theuser id and password you specified during installation and click Log in.5. The AXIS ThinWizard interface appears:
