Axis 540 series User Manual

Also see for 540 series: Specification User manual User manual User guide Quick installation guide

Contents

Axis 540 series User Manual Manual pdf 19 page image

Section 2: Basic InstallationAXIS 540/640 User’s Manual 19Connecting the AXIS 640/642 to the Token Ring NetworkCaution M DO NOT connect or disconnect the network cabling while theAXIS 640/642 is powered on.1. Switch off the printer and disconnect the AXIS 640/642 externalpower supply.2. Note the AXIS 640/642 serial number found on the undersidelabel of the print server. You need this number during thenetwork configuration.3. Slide the Ring Speed switch towards 4 or 16 depending on thering speed of your network.4. Connect your AXIS 640/642 to the network using an STP(Media Type 1) or UTP (Media Type 3) cable.5. Switch on the printer and connect the external power supply tothe AXIS 640/642.6. Successful connection of the AXIS 640/642 to your network willbe confirmed by the intermittent flashing of the NetworkIndicator.7. You are now ready to install your server onto your network usingone of the methods detailed in the Installation Guide, on page 20.By commencing with your preferred installation method, you canfurther verify that your AXIS 640/642 is properly connected toyour network.Notes: o Each AXIS 640/642 Print Server is pre-configured with a uniqueNode Address that is identical to the serial number. This can bechanged using the AXIS NetPilot, or any standard Web browser,if so required.o It is recommended that you use screened or foiled Media Type 3cabling for 16 Mbit networks and not standard UTP cabling.