|
Section 4: Setting Up - WindowsAXIS 540/640 User’s Manual 53Windows NTSetup forPeer-to-Peer PrintingFollow these steps to install your AXIS 540/640 for peer-to-peerprinting at a Windows NT workstation:1. Double-click the AXIS Print Utility icon.2. In the Port menu, click Add.3. In the NPS Port list, select the AXIS 540/640 port to be installed.The port appears as .LP1, where is AX followedby last six digits of your print server number e.g. AX100086.LP1.However, this alphanumeric name will be superseded by any newname given to your AXIS 540/640 when using AXIS NetPilot.4. Accept or change the suggested Windows Port name, and typeany comments in the Description field. Make a note of theWindows Port name as you will need this later, then click OK toinstall the Windows Port.5. In the Port menu, click Connect to bring up Print Manager.6. In the Printer menu, click Create Printer.7. Type a name in the Printer Name field, select a suitable printerdriver from the Driver list, and select Other... in the Print to list.8. In the Print Destinations dialog, select Local Port, then click OK.9. In the Port Name field, type: C:\~\where C:\~ is your spool directory, and is the WindowsPort name from step 4. Click OK.10. Close the Print Manager.The setup is completed and you can now print through your AXIS540/640.Note: o AXIS Print Utility for Windows must be running when you printthrough your AXIS 540/640. We strongly recommend that youcopy the AXIS Print Utility icon into your StartUp folder.
|
