Section 4: Setting Up - WindowsAXIS 540/640 User’s Manual 51Windows 95Setup forPeer-to-Peer PrintingFollow these steps to install your AXIS 540/640 for peer-to-peerprinting at a Windows 95 workstation:1. Double-click the AXIS Print Utility icon.2. In the Port menu, click Add.3. In the NPS Port list, select the AXIS 540/640 port to be installed.The port appears as .LP1, where is AX followedby last six digits of your print server number e.g. AX100086.LP1.However, this alphanumeric name will be superseded by any newname given to your AXIS 540/640 when using AXIS NetPilot.4. Accept or change the suggested Windows Port name, and typeany required comment in the Description field. Make a note ofthe Windows port name as you will need this later, then click OKto install the Windows port.5. In the Port menu, click Connect to bring up the Printers folder.6. Double-click the Add Printer icon. The Add Printer Wizard willthen guide you through the installation. Click Next to proceed.7. Choose Local Printer, then click Next.8. Choose Manufacturer and Printer, then click Next.9. Select the Windows port name from step 4, then click Next.10. Accept or change the suggested Printer Name, then click Next.11. Click Finish to complete the installation.The setup is completed and you can now print through your AXIS540/640.Note: o AXIS Print Utility for Windows must be running when you printthrough your AXIS 540/640. We strongly recommend that youestablish a shortcut to the AXIS Print Utility within your StartUpfile.
